Frigidaire Ice Maker Not Working – Repair Atlanta Georgia

Frigidaire FGSS Series refrigerator with open freezer compartment and empty ice bin

When a Frigidaire ice maker stops producing ice, the failure almost always follows a sequence. Ice production does not disappear without a reason. Either water stopped entering the mold, the freezing cycle is not completing, or the control system is not advancing the harvest cycle.

Same symptom turns up on other brands too – start with the Bosch ice maker not working troubleshooting guide.

In the Frigidaire FGHB and FGSS Series, the ice maker depends on four conditions remaining stable: 

  • proper freezer temperature, 
  • unrestricted water flow through the water inlet valve, 
  • a clear fill path without a frozen fill tube, 
  • and a functioning ice maker module that can cycle, harvest, and reset correctly.

When any one of those fails, the result is obvious: no ice.

The challenge is that different failures produce similar symptoms. A water filter clogged condition can look like a bad water inlet valve. A frozen fill tube can look like an electrical failure. A control arm stuck in the wrong position can mimic complete system failure. Even a minor rise in freezer temperature can pause ice production entirely while the refrigerator continues cooling normally.

In our repair practice, most Frigidaire ice maker not working complaints fall into predictable categories. Ice production stopped gradually. Cubes became smaller before stopping. The unit cycles but does not fill. The bin is empty with no mechanical noise. Each pattern points toward a specific subsystem.

Our guide explains how the ice maker system in FGHB and FGSS Series models is designed to operate, what typically interrupts the process, how to isolate a water inlet valve issue from a frozen fill tube obstruction, when an ice maker reset restores operation, and when the ice maker module itself has failed.

By the end of the article, you’ll understand not only why there is no ice, but which component is responsible and whether the repair involves water supply, temperature stability, or internal control failure.

How Ice Production Works in FGHB and FGSS Series

Before diagnosing why a Frigidaire ice maker is not working, it’s better to understand the cycle it follows every time while producing ice.

In FGHB and FGSS Series models, the process is automatic and repeatable. When freezer temperature is low enough, the ice maker module initiates a harvest cycle. A heating element briefly warms the mold just enough to release the frozen cubes. A motor turns ejector fingers that push cubes into the bin. Once the mold is empty, the module signals the water inlet valve to open for a timed fill.

Water flows through the fill tube into the mold. The valve closes. The water freezes. The cycle waits for temperature to reach the correct threshold before repeating.

If ice production stopped, the interruption occurred somewhere in that sequence.

The system depends on three core elements:

  • Temperature control
  • Water delivery
  • Mechanical harvest

We evaluate them in that order.

Freezer Temperature: The Silent Assistant

Ice production does not begin unless freezer temperature is within specification. In most Frigidaire FGHB and FGSS models, the freezer must remain at or below approximately 0°F for consistent cycling.

If freezer temperature rises, even slightly, the ice maker pauses. This protects the system from producing soft or incomplete cubes.

When customers complain about no ice, we measure actual freezer temperature rather than trusting the display. A temperature sensor drift can cause inaccurate readings. The control board may show normal numbers while the actual temperature is higher.

Indicators temperature is the root cause include:

  • Cubes becoming progressively smaller
  • Ice production slowing before stopping
  • Ice partially melting in the bin
  • Refrigerator recently experiencing not cooling properly issues

If freezer temperature stability is compromised, replacing the ice maker module will not restore production. Temperature comes first.

Technician testing water inlet valve on rear of Frigidaire refrigerator during ice maker repair

Analyzing the Basis of Water Inlet Valve

Once temperature is confirmed stable, we turn to water supply.

The water inlet valve is electrically controlled. When the ice maker module calls for water, the valve opens for a brief, timed interval. That timing determines cube size.

A failed water inlet valve may present in several ways:

  • No water entering the mold at all
  • Weak fill producing hollow cubes
  • Intermittent fill cycles
  • Valve humming but not opening

Mineral buildup inside the valve body can restrict flow even if the electrical coil is intact. In areas with hard water, we see this often.

Another common scenario is reduced pressure caused by a water filter clogged condition. When the filter reaches the end of its lifespan, flow rate drops. The valve may open normally, but insufficient water reaches the mold.

In those cases, replacing the water filter restores normal ice production immediately.

Before replacing the valve, we verify water pressure at the supply line and confirm that the valve receives proper voltage during the fill cycle.

Frozen fill tube inside Frigidaire freezer causing no ice production

Frozen Fill Tube: A Physical Blockage

If the water inlet valve is functioning but the mold remains dry, the frozen fill tube becomes a primary suspect.

The fill tube directs water from the valve into the ice mold. If residual water remains in the tube between cycles, it can freeze and slowly narrow the passage.

Over time, the tube may freeze completely.

When this happens:

  • The ice maker module cycles normally
  • The valve opens as expected
  • No water enters the mold

Thawing the frozen fill tube temporarily restores function. However, if the water inlet valve is seeping slightly between cycles, the tube will freeze again.

This is why recurring frozen fill tube cases often involve both the tube and the valve.

Proper diagnosis requires checking for slow drips at the valve outlet.

Ice maker module removed from Frigidaire FGHB Series freezer showing motor and gear assembly

Ice Maker Module

If temperature and water supply are both confirmed normal, the issue may lie within the ice maker module itself.

The module contains:

  • A small drive motor
  • A gear assembly
  • A heating element
  • Internal timing contacts

When the module fails, common patterns include:

  • No movement during harvest
  • Ejector fingers stalled mid-cycle
  • No call to the water inlet valve
  • Unit unresponsive even after ice maker reset

In some cases, a control arm stuck in the raised position prevents cycling. The arm is designed to stop production when the bin is full. If it binds or misaligns, the ice maker interprets the bin as full and remains idle.

For the wider picture on this brand, see our Frigidaire leaking water guide.

We always inspect the control arm for free movement before replacing the module.

An ice maker reset can restore operation in cases where the module lost synchronization. However, if internal gears are stripped or the motor has failed, reset will not correct the issue.

Restore Reliable Ice Production Today
Schedule a professional evaluation and get your Frigidaire ice maker working again.

Electrical Logic and Cycle Testing

When a Frigidaire ice maker is not working and both freezer temperature and water supply appear normal, electrical confirmation becomes necessary.

The ice maker module does not operate continuously. It cycles in stages:

  1. Freeze phase
  2. Harvest phase
  3. Water fill phase

If the unit remains silent with no ice production stopped message and no mechanical movement, one of these stages is failing to initiate.

In FGHB and FGSS Series units, we confirm:

  • Power reaching the ice maker module
  • Voltage delivered to the water inlet valve during fill
  • Motor continuity inside the ice maker module
  • Proper freezer temperature feedback

A unit may have power but fail to advance the harvest cycle. In that case, internal module contacts may be worn.

If the module advances but never sends voltage to the water inlet valve, the issue lies in control logic or module timing.

Symptom Comparison Table

When diagnosing a Frigidaire ice maker not working condition, symptom pattern is everything.

Observed Behavior

Likely Cause

What We Check First

No movement, no sound

No power to module or failed ice maker module

Module voltage and internal motor

Ice maker cycles but mold stays dry

Frozen fill tube or failed water inlet valve

Fill tube inspection and valve voltage

Hollow or small cubes

Water filter clogged or low pressure

Filter condition and supply pressure

Ice production slowed before stopping

Rising freezer temperature

Actual freezer temperature reading

Ice maker runs constantly

Control arm stuck or sensor fault

Arm position and bin detection

 

This table reflects all our field experience. The pattern narrows the direction before parts are replaced.

Real Case Pattern From Our Practice

A recent FGHB Series unit presented with no ice for three days. Freezer temperature was stable. The customer had already performed an ice maker reset without success.

Inspection showed:

  • Ice maker module advancing normally
  • Water inlet valve energizing
  • No water entering mold

The fill tube was fully frozen. Upon thawing, we found the water inlet valve seeping slightly between cycles. That slow seepage created residual water that froze and blocked the tube.

Replacing the valve corrected the root cause. Thawing alone would have resulted in repeat failure.

This pattern is common in humid environments.

How Ice Maker Reset Fits Into Diagnosis

An ice maker reset is often attempted before calling for service. In some cases, it resolves electronic synchronization errors.

However, reset only addresses control logic. It does not repair:

  • A water filter clogged condition
  • A frozen fill tube
  • A failed water inlet valve
  • A damaged ice maker module motor

Reset is useful only if the module stalled electronically. It is not a mechanical fix.

Preventing Repeat Ice Failure

Ice systems fail more often from restriction and moisture than from complete component failure.

In our service experience, prevention includes:

  • Replacing water filters at recommended intervals
  • Keeping freezer temperature stable
  • Inspecting door seals for air leaks
  • Avoiding overloading freezer shelves near the fill tube
  • Addressing minor ice irregularities early

A Frigidaire ice maker is a precision cycle system. Small irregularities compound quickly.

Book expert service and restore full ice production today.

When the Problem Is Not the Ice Maker

Occasionally, the ice maker itself is not the failing component. Instead, the refrigerator may have a broader cooling instability.

If freezer temperature fluctuates due to airflow restriction or dirty condenser coils, ice production becomes inconsistent.

When customers report that ice production stopped alongside a fridge warm issue, we evaluate the entire cooling system first.

Ice failure can be a symptom of cooling imbalance.

Decision Flow Summary

To simplify the diagnostic path:

  1. Confirm freezer temperature is within specification.
  2. Inspect fill tube for ice blockage.
  3. Verify water filter condition and supply pressure.
  4. Test water inlet valve voltage during fill cycle.
  5. Evaluate ice maker module motor and control arm movement.

Skipping steps often leads to incorrect part replacement.

Get a Precise Diagnosis Today
Let our technicians isolate the exact cause and restore reliable ice production.

Technical Troubleshooting Chart: Frigidaire FGHB / FGSS Ice Systems

The following chart reflects a structured diagnostic path we use in the field. It moves from least invasive checks to component-level evaluation.

Step

Observation

Test Action

Interpretation

Next Move

1

No ice, freezer feels normal

Measure actual freezer temperature

Above 5°F

Correct cooling issue before servicing ice maker

2

Freezer temperature stable

Inspect mold for water

Mold dry

Proceed to water delivery testing

3

Mold dry

Activate fill cycle and measure voltage at water inlet valve

No voltage

Ice maker module not advancing

4

Mold dry

Voltage present at water inlet valve

No water flow

Valve restricted or failed

5

Mold dry

Valve energizes, pressure normal

Water not entering mold

Frozen fill tube obstruction

6

Cubes small or hollow

Check water filter age and supply pressure

Low flow detected

Replace water filter clogged unit

7

Ice maker silent, no movement

Confirm power to module

No power

Trace wiring or control fault

8

Ejector fingers stall

Inspect gear assembly inside ice maker module

Gear wear or motor failure

Replace module

9

Bin empty but system inactive

Inspect control arm stuck position

Arm raised or binding

Adjust or replace mechanism

10

Intermittent production

Monitor freezer temperature stability

Fluctuation detected

Address airflow or cooling imbalance

 

How to Use This Chart

This chart is designed to prevent premature part replacement.

Start at freezer temperature. If temperature is not within specification, correct that first. Ice production depends entirely on freezer temperature stability.

If temperature is correct, determine whether water is entering the mold. A dry mold points toward water delivery or fill obstruction. A filled mold that never ejects cubes suggests an issue inside the ice maker module.

Voltage confirmation at the water inlet valve is critical. Without verifying whether power is present during the fill cycle, replacing the valve becomes speculation.

The frozen fill tube check should follow valve testing, not precede it. Many fill tubes freeze due to a seeping valve. Thawing without correcting the valve leads to repeat blockage.

Each step narrows the failure point.

Restore full ice production now
Schedule expert Frigidaire ice maker repair with our Atlanta technicians today

Escalation Awareness

Some symptoms overlap. For example, a water filter clogged condition can mimic valve failure. Likewise, unstable freezer temperature can mimic module malfunction.

That is why sequence matters.

In FGHB and FGSS Series refrigerators, ice systems are reliable when temperature, airflow, and pressure remain stable. Most failures originate in one of those supporting systems rather than in the ice maker module itself.

Electrical Testing: What to Measure and Why It Matters

Once basic visual checks are complete, electrical verification becomes the next logical step. Ice systems rely on timed voltage delivery. Without confirming voltage, replacing parts becomes guesswork.

Technician performing electrical  testing on ice maker frigidaire refrigerator

In FGHB and FGSS Series models, the ice maker module sends power to the water inlet valve during the fill stage. If the valve never receives voltage, the issue is not the valve itself. It is upstream.

When testing:

  • Confirm constant power supply to the ice maker assembly.
  • Measure voltage at the water inlet valve during the fill cycle.
  • Check continuity across the ice maker module motor.
  • Inspect wiring connections for corrosion or loosened terminals.

If voltage reaches the valve but no water flows, the valve is likely restricted or failed.
If no voltage reaches the valve during fill, the ice maker module is not advancing correctly.

Electrical confirmation prevents unnecessary valve replacement.

Stop wasting your valuable time on guesswork.
Book a precise ice system diagnosis and fix the problem at its source.

Harvest Cycle Failures and Gear Wear

In many service calls involving frigidaire ice maker not working, the mechanical portion of the harvest cycle has worn down gradually.

Inside the ice maker module is a small motor connected to a gear assembly. Over time, plastic gears may strip or crack. When that happens, the module may appear to start but fail to complete rotation.

Typical signs include:

  • Ejector fingers stopping mid-turn
  • Grinding or clicking during harvest
  • Partial cube ejection
  • Ice production stopped without water issues

In these cases, an ice maker reset will not restore normal function. The internal motor can no longer advance the cycle reliably.

Gear wear is more common in older units that have run through thousands of harvest cycles.

Intermittent Failures: The Most Frustrating Category

Some ice maker complaints are not constant. Ice production resumes temporarily, then stops again.

Intermittent behavior often points to:

  • Marginal freezer temperature fluctuation
  • A water inlet valve that opens inconsistently
  • A water filter clogged enough to restrict flow under peak demand
  • Wiring connections that expand and contract with temperature

In humid climates, even slight airflow imbalance inside the freezer can create small frost buildup near the frozen fill tube, partially restricting water entry.

Intermittent systems require patience and structured testing. Replacing the first suspected part rarely solves the issue long term.

When to Replace the Ice Maker Module

Replacement becomes appropriate when:

  • Motor continuity fails
  • Internal contacts are burned
  • Gear assembly is damaged
  • Control arm stuck repeatedly despite adjustment
  • Ice maker reset produces no response

If freezer temperature is stable and water delivery has been confirmed, module replacement is justified.

However, if temperature or pressure conditions are unstable, replacing the module will not restore reliable production.

The ice maker depends on the refrigerator’s larger system.

Long-Term Reliability Considerations

The ice maker operates under demanding conditions. It cycles through freezing, heating, and mechanical movement multiple times per day. Small inefficiencies accumulate.

To maintain reliable ice production in FGHB and FGSS Series units:

  • Replace filters on schedule to avoid water filter clogged restrictions.
  • Keep condenser coils clean to protect compressor efficiency.
  • Avoid overpacking the freezer near air vents.
  • Address minor cooling irregularities before they affect freezer temperature.

Ice makers are often the first component to reveal cooling imbalance.

Get your Frigidaire ice maker working again fast.
Call our experienced team and schedule immediate service.

Final Thoughts

When a Frigidaire ice maker not working complaint arises, the solution rarely requires guessing. The failure lies in one of four areas: freezer temperature stability, water supply through the water inlet valve, obstruction from a frozen fill tube, or malfunction within the ice maker module.

Each presents distinct patterns. Careful observation narrows the cause. Structured testing confirms it.

Replacing parts without confirming voltage, pressure, and temperature often leads to repeat repair.

Ice production is predictable when the system is stable. When ice production stopped, something in that sequence shifted. Finding that shift restores reliability.

Related guides

FAQ

1. Why is my Frigidaire ice maker not working even though the freezer seems cold?

Ice production depends on precise freezer temperature, not just whether the freezer feels cold. In FGHB and FGSS Series models, even a slight rise above the proper freezer temperature can pause cycling. If ice production stopped but food remains frozen, measure the actual temperature rather than relying on the display. Temperature instability is often the first cause of no ice.

If the mold remains dry after a harvest cycle and the ice maker module appears to advance normally, the water inlet valve should be tested during the fill stage. If voltage reaches the valve but no water flows, the valve is likely restricted or failed. However, a water filter clogged condition can mimic valve failure, so pressure should be verified before replacement.

A frozen fill tube usually develops when residual water remains in the tube between cycles. This can happen if the water inlet valve seeps slightly after closing. Over time, that moisture freezes and narrows the passage until water can no longer reach the mold. Simply thawing the tube may restore operation temporarily, but if the valve continues to seep, the blockage will return.

An ice maker reset can restore operation if the ice maker module has lost synchronization. It does not repair mechanical wear, stripped gears, a control arm stuck in the raised position, or a failed water inlet valve. Reset should be used as a diagnostic step, not as a permanent repair solution.

Replacement is appropriate when freezer temperature is stable, water delivery through the water inlet valve has been confirmed, the frozen fill tube has been cleared, and the module fails to advance or send voltage during the fill cycle. Electrical confirmation and continuity testing should be performed before installing a new ice maker module.

Contact Us

Content

appliancerepairmaster.com Terms and Conditions of Use

TERMS AND CONDITIONS OF USE

Company Name: Appliance Repair Master

Location: 1816 Briarwood Industrial Ct NE, Atlanta, GA 30329

Effective Date: June 5, 2026

Last Updated: June 5, 2026

By accessing or using this website, web page, client portal, mobile application, or any related content, functionality, services, emails, text messages, posts, or other electronic communications (collectively, the “Site”), or by requesting or receiving services from Appliance Repair Master (“Company,” “we,” “us,” or “our”), you agree to be bound by these Terms and Conditions of Use (“Terms”), our Privacy Policy, and all applicable laws and regulations.

If you do not agree to these Terms, you must not access or use the Site or services.

1. Ownership & Intellectual Property

The Site and all contents, features, and functionality, including information, software, text, images, video, audio, and design, are owned by Appliance Repair Master, its licensors, or content providers and are protected by U.S. and international intellectual property laws.

We reserve the right to withdraw or amend the Site or any services without notice. We are not liable if any part of the Site is unavailable.

2. Use License

Permission to use the Site is granted as a limited, non-exclusive, non-transferable license. This license automatically terminates if you violate these Terms and may be terminated by Appliance Repair Master at any time.

You may not:

  • modify or copy materials
  • use materials for commercial or public display
  • decompile or reverse engineer software
  • engage in scraping, data mining, or harvesting
  • remove proprietary notices
  • transfer or mirror materials on another server

3. Posting Content

“Content” includes text, images, video, audio, comments, reviews, testimonials, or feedback you submit.

By posting Content publicly or providing it to us in any form (including through review platforms, social media tags, or direct messages), you grant Appliance Repair Master a worldwide, perpetual, irrevocable, royalty-free, sublicensable, transferable license to use, reproduce, modify, adapt, publish, translate, distribute, and display such Content in any media now known or later developed.

Content must not infringe third-party rights, contain confidential information of others, or violate laws. We may remove Content at any time without notice.

4. Services & Appointments

By requesting services, you confirm you are the owner of the appliance and property, or are authorized to act on the owner’s behalf, and you grant our technicians access to the service area. Appointment times are estimates and may change due to operational conditions, traffic, parts availability, or prior job complexity.

We make commercially reasonable efforts to arrive within the scheduled window but do not guarantee arrival at a specific time.

5. Diagnostic & Service Fees

A diagnostic fee, trip fee, or service call fee may apply to each appointment and is payable whether or not you choose to proceed with the recommended repair. Current fee amounts will be disclosed at the time of scheduling.

If you authorize repair work after diagnosis, the diagnostic fee may be applied toward the total repair cost at our discretion.

6. Estimates, Authorization & Pricing

Before performing repair work beyond diagnosis, our technician will provide an estimate of parts and labor. By authorizing the work (verbally, in writing, electronically, or by signing a work order), you agree to pay the quoted amount.

Final pricing may vary if:

  • additional issues are discovered during the repair
  • additional parts are required
  • the scope of work changes with your approval

You will be notified of any material change before additional charges are incurred. Pricing is exclusive of applicable taxes.

7. Payments

Payment is due in full at the time of service unless otherwise agreed in writing. We accept the payment methods disclosed at the time of service.

Non-payment may result in:

  • service refusal or suspension
  • collection actions and reporting to credit bureaus
  • reasonable attorneys’ fees, court costs, and collection costs

Returned payments may be subject to a returned-payment fee, and unpaid balances may accrue interest at the maximum rate allowed by Georgia law.

8. Parts Policy

Unless otherwise specified, we use new genuine parts from authorized distributors. Used, refurbished, or customer-supplied parts may be installed only at the customer’s request and are not covered by our workmanship warranty.

Removed defective parts become the property of Appliance Repair Master unless you request their return at the time of service.

9. Communications Consent (Calls, SMS & Email)

By providing your phone number and contact information to Appliance Repair Master, you expressly consent and agree that Appliance Repair Master may contact you at the phone number(s) and email address(es) you provide using:

  • live and automated telephone calls (including pre-recorded or artificial voice messages)
  • text messages (SMS) and multimedia messages (MMS)
  • email
  • push notifications and in-app messages

Purposes of communications include, but are not limited to:

  • appointment scheduling, confirmations, reminders, and changes
  • service updates and “technician on the way” notifications
  • diagnostic findings, estimates, and approval requests
  • invoicing, payment receipts, and collection
  • warranty follow-up and quality assurance
  • customer support
  • service reminders, satisfaction surveys, and review requests
  • promotional offers, discounts, and marketing communications

Disclosures (TCPA / E-SIGN Act):

  • Messages are sent only by Appliance Repair Master; we do not share your phone number with third-party advertisers.
  • Communications may be delivered using automated technology, including autodialers.
  • Message frequency varies based on your interactions with us.
  • Message and data rates may apply through your wireless carrier.
  • Carriers are not liable for delayed or undelivered messages.
  • Consent to receive marketing communications is not a condition of purchasing any goods or services from us.

Opt-out and help:

  • Reply STOP to any marketing text to unsubscribe from marketing texts.
  • Reply HELP for assistance, or contact us using the information in Section 28.
  • You may unsubscribe from marketing emails using the link in any marketing email.
  • You may request removal from calling lists by contacting us directly.

Even after opting out of marketing messages, you may continue to receive transactional and service-related messages necessary to complete or follow up on a service you requested. Your consent is documented electronically and retained in accordance with the Electronic Signatures in Global and National Commerce Act (E-SIGN).

10. Recording of Calls

Telephone calls to or from Appliance Repair Master may be monitored or recorded for quality assurance, training, dispute resolution, and compliance purposes. By continuing the call after this disclosure (provided verbally or in writing), you consent to such recording. Georgia is a one-party consent state under O.C.G.A. § 16-11-62.

11. Service Documentation, Photos, Videos & Media Use

11.1 Documentation

By requesting or receiving services from Appliance Repair Master, you acknowledge and agree that our technicians, employees, and authorized representatives may capture photographs, video recordings, audio recordings, and other media of the appliance(s), parts, work areas, model and serial numbers, and surrounding service areas before, during, and after the service.

11.2 Authorized Uses

You agree that Appliance Repair Master may use, reproduce, modify, edit, publish, distribute, display, and transmit such media for any lawful business purpose, including but not limited to:

  • documentation of the work performed
  • quality control and internal review
  • technician training and performance evaluation
  • warranty claims and dispute resolution
  • insurance, regulatory, and compliance purposes
  • internal and external reporting
  • marketing, advertising, public relations, and promotional materials
  • the Company website, social media accounts (Facebook, Instagram, TikTok, YouTube, X, LinkedIn, and similar), online listings, search advertising, and printed materials
  • before-and-after comparisons and case studies
  • AI-assisted training and automated quality review

11.3 Grant of Rights

You grant Appliance Repair Master a non-exclusive, royalty-free, fully paid-up, perpetual, irrevocable, worldwide, sublicensable, and transferable right and license to use the media described above for the purposes listed in Section 11.2. You acknowledge that you will not receive any compensation, royalty, or other consideration for the use of such media.

11.4 Limitations on What We Capture

We make commercially reasonable efforts to limit media to the equipment and service-related areas and to avoid capturing:

  • recognizable faces of household members
  • minor children
  • personal documents, mail, or sensitive personal information
  • artwork, photographs, or other identifiable personal items

If a household member inadvertently appears in media used for marketing, we will, upon written request and reasonable verification, blur or remove the identifying features or remove the media from publicly accessible channels.

11.5 Property Address

We will not publicly publish your street address or full property address in marketing materials without your separate written consent. General references to neighborhood, city, or region (e.g., “Atlanta, GA” or “Atlanta metro”) may be used.

11.6 Opt-Out

If you do not wish to have media of your appliance or service area used for marketing or public-facing purposes, you must notify us in writing before the start of the service appointment at [email protected]. Opt-out requests do not affect our right to capture and retain media for documentation, warranty, training, insurance, and dispute-resolution purposes described in Section 11.2.

11.7 Release

You release Appliance Repair Master, its officers, employees, contractors, and assigns from any and all claims, demands, or causes of action arising out of the authorized uses described in this Section 11, including any claim for invasion of privacy, right of publicity, defamation, or copyright infringement.

12. Reviews & Testimonials

If you provide a review, testimonial, rating, photograph, or written or video feedback to Appliance Repair Master or post one publicly (including on Google, Yelp, Facebook, Nextdoor, the Better Business Bureau, or similar platforms), you grant Appliance Repair Master the right to share, reproduce, and display that content across our marketing channels, with attribution to your first name and last initial only unless you consent in writing to additional identification.

13. Limitations on Service & Pre-Existing Conditions

Appliance Repair Master is not responsible for:

  • pre-existing conditions, hidden defects, or latent failures
  • damage or failure of components not serviced by us
  • failures that become apparent during or after service due to age, wear, or unrelated issues
  • conditions caused by improper prior installation, modifications, or unauthorized repairs

Appliance systems may have multiple underlying issues. While we aim to diagnose accurately, additional repairs may be required, and we do not guarantee that one repair will resolve all symptoms.

14. Refrigerant, Sealed Systems & Hazardous Materials

Repairs involving refrigerants, sealed systems, gas lines, or other hazardous materials are performed in compliance with applicable EPA Section 608 regulations and Georgia law. You acknowledge that:

  • sealed-system repairs may not fully restore original performance on aging units
  • refrigerant disposal and recovery fees may apply
  • we are not liable for damage resulting from undisclosed prior tampering with sealed systems, refrigerant charges, or refrigerant types

15. Smart Appliances & Connected Data

If your appliance is connected to Wi-Fi, a mobile app, or another network, we may temporarily disconnect or reset the appliance during service. You are responsible for re-pairing the appliance with your network and account credentials after the repair. We do not store, access, or copy data from your connected appliance beyond what is necessary to perform the requested service.

16. Customer Preparation & Property Access

You agree to:

  • provide safe and unobstructed access to the appliance and service area
  • secure pets in a separate room during the technician’s visit
  • ensure children are supervised and away from the work area
  • disclose any known hazards (mold, asbestos, pest infestation, structural issues, electrical defects)
  • remove perishable contents from refrigerators or freezers prior to certain repairs, when requested
  • have an adult (18+) present for the duration of the appointment

We are not liable for damage resulting from:

  • unsafe working conditions
  • undisclosed hazards
  • improper prior installations
  • code violations or non-compliant modifications
  • inability to access the appliance due to obstructions

Technicians reserve the right to refuse, pause, or terminate service if conditions are unsafe, abusive, or otherwise unreasonable.

17. Cancellation, Rescheduling & Trip Fee Policy

Cancellations or rescheduling with less than 24 hours’ notice may be subject to a cancellation or trip fee.

If a technician is dispatched and one of the following occurs, a service fee may still apply:

  • no one is present to grant access
  • the technician is denied access or asked to leave
  • the appliance is not at the service address
  • unsafe conditions prevent the work from being performed

18. Workmanship Warranty

Subject to the exclusions below, Appliance Repair Master warrants:

  • Labor / workmanship: [30 / 60 / 90] days from the date of completed service
  • Parts installed by us: the lesser of the manufacturer’s parts warranty or [90 days] from installation

This warranty applies only to:

  • the specific repair performed
  • the specific component(s) replaced
  • the original customer at the original service address
  • appliances used in normal, single-family residential settings

This warranty does NOT cover:

  • customer-supplied parts
  • damage from misuse, abuse, accident, power surge, flood, fire, or acts of God
  • normal wear and tear or consumable items
  • repairs or modifications made by unauthorized persons after our service
  • pre-existing conditions or unrelated failures
  • commercial, rental, or shared-use environments unless agreed in writing
  • cosmetic damage that does not affect appliance function

To make a warranty claim, you must contact us within the warranty period using the information in Section 28 and provide proof of the original service. Our sole obligation under this warranty is, at our option, to re-perform the labor or replace the failed part. No refunds, replacements of the appliance, or compensation for incidental or consequential damages are provided under this warranty.

19. Disclaimer of Warranties

EXCEPT FOR THE LIMITED WORKMANSHIP WARRANTY IN SECTION 18, THE SITE, SERVICES, AND MATERIALS ARE PROVIDED “AS IS” AND “AS AVAILABLE” WITHOUT WARRANTIES OF ANY KIND.

TO THE FULLEST EXTENT PERMITTED BY LAW, APPLIANCE REPAIR MASTER DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. WE DO NOT WARRANT THAT THE SITE IS FREE FROM HARMFUL CODE, AND YOU ARE RESPONSIBLE FOR YOUR OWN SAFEGUARDS.

This Section does not waive any non-disclaimable rights you may have under Georgia law, including those under O.C.G.A. § 11-2-314 and § 11-2-315.

20. Limitation of Liability

TO THE FULLEST EXTENT PERMITTED BY LAW, APPLIANCE REPAIR MASTER, ITS AFFILIATES, LICENSORS, SERVICE PROVIDERS, OFFICERS, EMPLOYEES, CONTRACTORS, AND AGENTS ARE NOT LIABLE FOR ANY:

  • INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR PUNITIVE DAMAGES
  • LOSS OF PROFITS, REVENUE, BUSINESS, OR DATA
  • LOSS OR SPOILAGE OF FOOD, MEDICATION, OR OTHER CONTENTS OF A REFRIGERATOR, FREEZER, OR WINE STORAGE UNIT
  • WATER DAMAGE, FLOODING, MOLD, OR PROPERTY DAMAGE RESULTING FROM APPLIANCE FAILURE BEFORE, DURING, OR AFTER SERVICE
  • ELECTRICAL DAMAGE, FIRE, OR DAMAGE TO CONNECTED PROPERTY
  • LOSS OF USE OR INCONVENIENCE

Our total aggregate liability for any claim arising out of or related to the Site, the Services, or these Terms shall not exceed the greater of (a) the amount paid by you to Appliance Repair Master for the specific service giving rise to the claim, or (b) $500.

These limitations apply regardless of the legal theory (contract, tort, negligence, strict liability, or otherwise) and even if we have been advised of the possibility of such damages. Some jurisdictions do not allow certain limitations, in which case our liability is limited to the maximum extent permitted by law.

21. Indemnification

You agree to defend, indemnify, and hold harmless Appliance Repair Master and its affiliates, officers, employees, contractors, and agents from any claims, damages, losses, liabilities, costs, or expenses (including reasonable attorneys’ fees) arising from:

  • your violation of these Terms
  • your misuse of the Site or services
  • your violation of any law or third-party right
  • undisclosed hazards or conditions at the service location
  • inaccurate information you provide to us

22. Revisions & Accuracy

Site materials may contain errors. Appliance Repair Master may make changes at any time without notice and does not commit to updating materials.

23. Third-Party Links & Services

Links to third-party websites are provided for convenience only. Appliance Repair Master does not control or endorse third-party content. If we use a third-party SMS or messaging platform, your participation may also be subject to that provider’s own terms, including provisions for opt-in, opt-out, frequency, fees, privacy, arbitration, and dispute resolution.

24. Governing Law, Venue & Dispute Resolution

These Terms are governed by the laws of the State of Georgia, without regard to conflict-of-law principles.

Informal Resolution. Before initiating any formal proceeding, the parties agree to attempt to resolve disputes informally by contacting Appliance Repair Master in writing.

Binding Arbitration. If informal resolution fails, any dispute arising out of or relating to these Terms or the services shall be resolved by binding individual arbitration administered by the American Arbitration Association (AAA) under its Consumer Arbitration Rules, in DeKalb County, Georgia, or another mutually agreed location. Judgment on the award may be entered in any court of competent jurisdiction.

Class Action Waiver. You and Appliance Repair Master agree that any dispute will be brought in your individual capacity only, and not as a plaintiff or class member in any purported class, collective, consolidated, or representative proceeding. The arbitrator may not consolidate claims and may not preside over any form of representative proceeding.

Exceptions. Either party may bring a small-claims-court action, and either party may seek injunctive relief in court to protect intellectual property rights, without waiving arbitration of other claims.

Limitation of Actions. Any claim arising out of these Terms or the services must be brought within one (1) year after the cause of action accrues, or be forever barred, except where applicable law prohibits such a limitation.

25. Force Majeure

Appliance Repair Master is not liable for any delay or failure to perform resulting from causes beyond our reasonable control, including but not limited to acts of God, natural disasters, severe weather, public health emergencies, pandemics, war, terrorism, civil unrest, labor disputes, government action, utility failures, supply-chain disruptions, parts shortages, or internet/telecommunications outages.

26. General Provisions

Modifications. Appliance Repair Master may revise these Terms at any time. Continued use of the Site or services after changes are posted constitutes acceptance of the updated Terms.

Entire Agreement. These Terms, together with our Privacy Policy and any signed work orders or invoices, constitute the entire agreement between you and Appliance Repair Master and supersede all prior oral or written agreements.

Severability. If any provision is held invalid or unenforceable, the remaining provisions remain in full force and effect.

No Waiver. Failure to enforce any provision is not a waiver of our right to do so later.

Assignment. You may not assign these Terms without our written consent. We may assign these Terms in connection with a merger, acquisition, or sale of assets.

Survival. Sections that by their nature should survive termination (including Sections 11, 19, 20, 21, and 24) survive.

Headings. Headings are for convenience only and do not affect interpretation.

Notices. Legal notices to Appliance Repair Master must be sent in writing to the address in Section 28. Notices to you may be sent to the email or address you provided.

27. Compliance with Georgia Law

Appliance Repair Master operates in compliance with all applicable federal, state, and local laws, including the laws of the State of Georgia and applicable regulations in Atlanta, DeKalb County, and the greater Atlanta metropolitan area.

Nothing in these Terms limits any non-waivable rights granted to consumers under Georgia law, including under the Georgia Fair Business Practices Act (O.C.G.A. § 10-1-390 et seq.) and the Uniform Commercial Code as adopted in Georgia.

28. Contact Information

For questions, warranty claims, opt-out requests, or communications preferences, contact us at:

Appliance Repair Master

📍 1816 Briarwood Industrial Ct NE, Atlanta, GA 30329

📞 Phone: (770) 659-7597 

📧 Email: [email protected]

🌐 Website: https://wp.appliancerepairmaster.com

For SMS assistance, reply HELP to any message you receive, or STOP to opt out of marketing texts.

appliancerepairmaster.com Privacy Policy

PRIVACY POLICY

Company Name: Appliance Repair Master

Effective Date: June 5, 2026

Last Updated: June 5, 2026

Your privacy is important to us. This Privacy Policy explains how Appliance Repair Master (“Company,” “we,” “us,” or “our”) collects, uses, protects, and discloses information when you use our website, web pages, client portal, mobile applications, and related services (collectively, the “Site” and “Services”).

This Privacy Policy applies only to this Site and Services and does not apply to any other websites or offline services unless explicitly stated.

BY USING THE SITE OR SERVICES, YOU CONSENT TO THIS PRIVACY POLICY. PLEASE READ IT CAREFULLY.

1. Personal Information We Collect

Depending on how you interact with us, we may collect the following categories of Personal Information:

Contact Information

  • First and last name
  • Mailing or service address
  • Email address
  • Phone number

Identifiers & Technical Information

  • IP address
  • Device and browser information
  • Log files and timestamps
  • Account or authentication information (where applicable)

Financial Information

  • Payment card or banking details (processed securely through third-party payment processors; we do not store full payment details)

Demographic Information

  • Age or age range
  • Gender or general demographic data (if voluntarily provided)

Geolocation Data

  • Approximate location based on IP address or service address

Internet & Electronic Activity

  • Pages viewed and interactions with the Site
  • Browsing and navigation behavior
  • Referral sources and usage patterns

Commercial Information

  • Services requested or purchased
  • Appointment and transaction history

Audio & Visual Information

  • Before-and-after photos or videos of serviced areas
  • Call recordings or chat transcripts where permitted by law

Inferences

  • Preferences or tendencies inferred from usage and interactions to improve services and communications

2. How We Use Your Information

We may use Personal Information for the following purposes:

Service & Transactional Purposes

  • Schedule, manage, and complete service requests
  • Communicate appointment confirmations and updates
  • Process payments and billing
  • Provide customer support

Operational & Analytical Purposes

  • Improve the Site and Services
  • Monitor performance and usage trends
  • Diagnose technical issues

Marketing & Promotional Purposes (With Consent)

  • Send promotional emails, text messages, or calls
  • Provide personalized offers or service reminders
  • Conduct promotions or loyalty initiatives

Content & Reviews

  • Display reviews or feedback you voluntarily submit
  • Use photos or media only with explicit marketing consent

Security, Fraud Prevention & Legal Compliance

  • Protect against fraud or misuse
  • Enforce agreements
  • Comply with legal obligations and lawful requests

3. Communications (Calls, SMS & Email)

By providing your contact information, you consent to receive phone calls, text messages (SMS/MMS), and emails related to:

  • service updates
  • appointment confirmations
  • billing and customer support

Marketing communications are sent only where permitted and consented to.

You may manage your communication preferences at any time:

  • SMS: Reply STOP to opt out
  • Email: Use the unsubscribe link in marketing emails
  • Calls: Contact us to request removal from calling lists

Even if you opt out of marketing communications, we may still contact you for transactional or service-related purposes.

4. Photos & Service Documentation

During service, we may capture photos or videos of:

  • appliances
  • parts
  • work areas

These may be used for:

  • documentation of work performed
  • quality control
  • technician training
  • warranty and legal protection
  • insurance purposes
  • marketing, advertising, and public relations

We take reasonable steps to avoid capturing:

  • people
  • personal documents
  • identifying information

By using our services, you acknowledge and agree to this practice.

5. Sources of Information

We collect information from:

  • you directly (forms, calls, messages, bookings)
  • service providers acting on our behalf (CRM, analytics, SMS platforms, payment processors)
  • third-party sources where permitted by law
  • cookies and similar technologies

6. Sharing of Personal Information

We do not sell, rent, or trade Personal Information.

We may share information with:

  • service providers necessary to operate our business
  • contractors or technicians performing services
  • affiliates under common ownership, where permitted
  • legal authorities when required by law

All third parties are required to protect your information.

7. Business Transfers

In the event of a merger, acquisition, reorganization, bankruptcy, asset sale, or similar business transaction, your Personal Information may be transferred to a successor entity as part of the assets. We will use reasonable efforts to ensure the receiving party honors the commitments made in this Privacy Policy or notify you of any material changes.

8. Cookies & Tracking Technologies

We may use cookies, web beacons, pixel tags, clear GIFs, local storage, and similar technologies to:

  • improve Site functionality
  • analyze usage
  • support marketing and analytics

The cookies we use may include:

  • Session Cookies — to operate the Site during your visit
  • Preference Cookies — to remember settings and preferences
  • Security Cookies — for authentication and fraud prevention
  • Analytics & Advertising Cookies — to measure performance and reach

We may use third-party analytics tools, including Google Analytics, to understand how users interact with the Site. You can opt out of Google Analytics by installing the Google Analytics Opt-Out Browser Add-on.

You can control cookies through your browser or device settings. Disabling cookies may affect certain features.

9. Do Not Track & Global Privacy Control

Some browsers transmit “Do Not Track” (DNT) signals or Global Privacy Control (GPC) signals. Because there is no industry consensus on how to interpret DNT signals, we do not currently respond to DNT signals. Where required by applicable law, we will honor valid GPC signals as a request to opt out of sale or sharing of Personal Information.

10. Session Replay Technology

We use session replay technology to understand how users interact with our Site. This may record actions such as scrolling, clicks, navigation paths, and cursor movements.

Session replay data is used for:

  • quality assurance
  • customer support
  • fraud prevention and security
  • Site optimization

This data may be collected and stored by third-party service providers acting on our behalf.

11. Chatbot Technology

We use chatbots and virtual assistants to provide customer support. When you interact with a chatbot:

  • information you provide is collected
  • chat transcripts may be stored
  • conversations may be reviewed for quality, training, and security

Chats may be escalated to a human representative when necessary.

12. Advertising & Online Tracking

We and our authorized partners may collect information across devices and platforms to measure advertising performance and deliver relevant marketing.

Advertising and tracking preferences are device- and browser-specific and must be managed separately on each device or browser you use.

13. Managing Your Preferences

You may manage your preferences at any time:

  • opt out of marketing emails via unsubscribe links
  • opt out of SMS by replying STOP
  • request changes to call preferences by contacting us

14. Your Privacy Rights

Depending on where you live, you may have the following rights regarding your Personal Information:

  • Right to Know / Access — request confirmation of whether we process your information and what we collect
  • Right to Correct — request correction of inaccurate information
  • Right to Delete — request deletion of your Personal Information, subject to legal exceptions
  • Right to Portability — request a copy of your information in a portable format
  • Right to Opt Out — opt out of sale, sharing for cross-context advertising, or significant automated profiling
  • Right to Non-Discrimination — exercise your rights without being discriminated against

To exercise any of these rights, contact us using the information in Section 23. We will verify your identity before processing the request. We aim to respond within 45 days, or as required by applicable law. You may also designate an authorized agent to submit a request on your behalf.

California residents may additionally request, once per calendar year, a list of categories of Personal Information disclosed to third parties for direct marketing purposes (“Shine the Light” — Cal. Civ. Code § 1798.83).

15. Sale or Sharing of Personal Information

We do not sell Personal Information for monetary consideration. To the extent that the use of cookies or advertising tools may be considered “sharing” under certain state laws (such as California, Colorado, or Virginia), you may opt out by adjusting your browser cookie settings, transmitting a Global Privacy Control signal, or contacting us directly.

16. Sensitive Personal Information

We do not knowingly collect categories of sensitive personal information (such as Social Security number, government ID, precise geolocation, racial or ethnic origin, religious beliefs, health data, biometric data, or financial account login credentials) for purposes other than providing the requested Services, preventing fraud, or complying with the law.

17. Data Retention

We retain Personal Information only as long as necessary to:

  • provide the Services requested
  • fulfill the purposes outlined in this Privacy Policy
  • comply with our legal, tax, accounting, and warranty obligations
  • resolve disputes and enforce our agreements

Typical retention periods:

  • Service and transaction records: up to 7 years (to comply with tax and warranty obligations)
  • Marketing preferences and opt-outs: retained indefinitely to honor your choice
  • Website analytics data: typically up to 26 months
  • Call recordings and chat transcripts: up to 12 months, unless needed for dispute resolution

When information is no longer needed, we securely delete, anonymize, or aggregate it.

18. Data Security

We maintain reasonable administrative, technical, and physical safeguards designed to protect your information, which may include:

  • encryption of data in transit (SSL/TLS)
  • access controls and authentication requirements for employees and contractors
  • secure third-party payment processors (PCI-compliant)
  • regular review of internal data-handling procedures

However, no system is completely secure, and you use the Site and Services at your own risk.

19. Data Breach Notification

In the event of a confirmed breach of unencrypted personal information, we will notify affected individuals in accordance with applicable law, including Georgia’s data breach notification statute (O.C.G.A. § 10-1-910 et seq.) and other applicable state and federal laws. Notification will be made in the most expedient time possible without unreasonable delay, except where a law enforcement agency advises that notification would impede an investigation.

20. Aggregated & De-Identified Data

We may aggregate or de-identify Personal Information so that it can no longer reasonably be linked to you. We may use, disclose, and retain such aggregated or de-identified information for any lawful business purpose, including analytics, research, and reporting, without further notice.

21. Third-Party Links

Our Site may contain links to third-party websites. We are not responsible for their privacy practices or content. Accessing third-party sites is at your own risk.

22. Children’s Privacy

Our Services are intended for adults. We do not knowingly collect Personal Information from children under 16 years of age. If such information is identified, it will be deleted. Parents or guardians who believe a child has provided us with information may contact us at the address in Section 23 to request deletion.

23. International Data Processing

Your information may be processed or stored in the United States or other jurisdictions where our service providers operate. If you access the Site from outside the United States, you acknowledge that your information may be transferred to, stored, and processed in the U.S., where data protection laws may differ from those in your jurisdiction.

24. Disclaimer

This Privacy Policy describes our general privacy practices and does not create contractual rights beyond those provided by applicable law. We cannot guarantee absolute security of electronic data transmissions.

25. Changes to This Privacy Policy

We may update this Privacy Policy from time to time. Changes become effective when posted, and the “Last Updated” date at the top will be revised. For material changes, we will provide additional notice (such as a website banner or email) where required. Continued use of the Site or Services constitutes acceptance of the revised policy.

26. Access, Correction & Requests

You may request access to, correction of, or deletion of your Personal Information by contacting us using the information below. We will respond in accordance with applicable law.

27. Contact & Official Correspondence

Appliance Repair Master

1816 Briarwood Industrial Ct NE, Atlanta, GA 30329

📞 Phone: (770) 659-7597 

📧 Email: [email protected]

🌐 Website: https://wp.appliancerepairmaster.com

For privacy-related requests, please include “Privacy Request” in the subject line so we can route your inquiry promptly.